Are Ice Skate Blades Sharp? The Radius of Hollow Explained
This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases.
Yes, ice skate blades are sharp, but not in the way a kitchen knife is sharp. A skate blade has two distinct edges separated by a concave groove called the Radius of Hollow (ROH). This hollow is ground into the bottom of the blade and measured in fractions of an inch or millimeters, common settings range from 1/2″ (13mm) to 1 1/4″ (31mm). A deeper hollow gives more grip and less glide, while a flatter hollow gives less grip but more glide. The ‘sharpness’ you feel is the steepness of these edges, which determines how much they bite into the ice versus glide over it.
That distinction between grip and glide is the whole game. It’s why Bauer suggests lighter skaters typically use a deeper hollow such as ½” or 5/8”, while heavier, stronger skaters typically go with a shallower hollow. However, recommendations vary by source and discipline. The blade isn’t just sharp or dull; it’s tuned. A common question is: are ice skate blades sharp?
What follows is a breakdown of the measurement system, how often you actually need to sharpen, and the one thing to tell your sharpener so you don’t walk out with blades that feel like they’re stuck in concrete.
Key Takeaways
- Skate sharpness is defined by the Radius of Hollow (ROH), a concave groove measured in inches/mm, not a single knife-like edge.
- A deeper ROH (e.g., 1/2″) gives more grip but less glide, while a shallower ROH (e.g., 1″) gives more glide but less grip.
- New skates are not sharp. Bauer states they “do not have any edges from the start” and require a professional sharpening before first use.
- Sharpening frequency is hotly debated: competitive players may sharpen every 2–3 hours, while recreational skaters can go 10–30 hours between sessions, depending on ice conditions.
- The World Ice Skating Community (WISC) states that when skating on plastic ice, you should resharpen quite often (around every 1-2 hours) and those used to skate on flat sharpening on plastic ice should have a hollowness around 25 mm. Other sources provide no specific guidance for plastic ice.
The Radius of Hollow (ROH): Your Blade’s Grip Setting

Forget ‘sharp.’ The real term is Radius of Hollow (ROH). Take a cross-section of your blade, and you’ll see an upside-down U shape. The curve of that U is the hollow, and its depth is measured as the radius of an imaginary circle that would fit perfectly inside that curve.
The Radius of Hollow (ROH) is the concave groove ground into the bottom of a skate blade, creating two distinct edges. Measured in fractions of an inch or millimeters, it determines the angle and depth of the blade’s contact with the ice. Common measurements are 1/2″ (13mm), 5/8″ (16mm), 3/4″ (19mm), 7/8″ (22mm), 1″ (25mm), and 1 1/4″ (31mm), with 1/2″ and 5/8″ being the most common default settings at pro shops.
This isn’t marketing. A 2010 peer-reviewed study in Sports Engineering by Federolf and Redmond measured it directly: “Friction increased with decreasing hollow radius.” Their study on skate sharpening and friction found that a deeper hollow (smaller radius number) creates more friction with the ice, which translates to more grip for turns and stops, but at the cost of speed and stamina.
Here’s how the common measurements break down in practice:
| ROH (Imperial / Metric) | Feel on Ice | Best For |
|---|---|---|
| 1/2″ (13mm) | High grip, low glide. Bites hard, can feel “sticky” or fatiguing on long strides. | Lighter skaters, beginners needing stability, aggressive turners. |
| 5/8″ (16mm) | Balanced grip and glide. The most popular default. | General recreational skating, most hockey players. |
| 3/4″ (19mm) – 1″ (25mm) | Low grip, high glide. Feels “slippery” at first but enables faster, less tiring skating. | Heavier/stronger skaters, speed-focused players, advanced skaters comfortable with less bite. |
Bauer states most skate shops sharpen blades at 1/2″ (13mm) or 5/8″ (16mm) unless asked for a specific measurement, while Chalet Ice Rinks Pro Shop recommends a medium hollow (ROH 7/16″–8/16″) for adults and medium-weight children. That’s a fine starting point, but it’s not a personal prescription. Your weight, strength, and the ice temperature all change the equation.
How Often Should You Actually Sharpen Your Skates?

This is where sources disagree loudly, and the right answer depends entirely on who you are and what ice you’re skating on.
We should be realistic about the recommendations. You have two extremes:
- Competitive Intensity: Bauer recommends sharpening after every 2 to 3 hours on ice for competitive players. Anecdotal advice from professional sharpeners like Fred’s Skate Sharpening notes many top skaters won’t go beyond 15 hours.
- Recreational Reality: The Chalet Ice Rinks Pro Shop guide suggests sharpening every 20-30 hours for the average recreational skater. The World Ice Skating Community (WISC) splits the difference, recommending a resharpen every 10-15 hours on indoor ice.
So who’s right? They all are, for their context. A competitive player is maximizing performance and edge consistency. A weekend warrior is balancing performance with cost and convenience. The more you skate, the more you’ll feel the drop-off.
Where this goes sideways: Waiting until your blades feel completely dull. By then, you’ve already been skating on compromised edges for hours, wasting practice time and teaching your muscles bad habits. A sharpening should be a minor reset, not a revelation.
Your environment is the wild card. Outdoor ice is generally tougher on skates, containing more debris and having a harder, often colder surface. You’ll need to sharpen more often. The real outlier is synthetic ice. WISC states bluntly: when skating on plastic ice, you should resharpen quite often (around every 1-2 hours) because the material rapidly degrades the edge.
Signs Your Blades Are Too Sharp or Too Dull
You don’t need to be an expert to diagnose your blades, but understanding why are ice skate blades sharp is key. Your feet and the ice will tell you everything. Here’s what to feel for.
Your Blades Are Too DULL If:
- You slip out during pushes. Your foot slides laterally when you try to push off for a stride, instead of biting in.
- Stopping requires excessive effort. You have to really dig your edges in, or you slide too far with a snowplow stop.
- A visual check shows a flat, shiny bottom. A sharp edge, in strong light, gives no reflection. A dull blade develops a flat, reflective spot along the bottom.
- They feel insecure on deep edges. During a tight turn or crossover, you feel like you might slip out from under yourself.
Your Blades Are Too SHARP (or the Hollow is Too Deep) If:

- You feel “stuck” or your strides are “chattery.” The blade bites so hard it impedes a smooth glide, causing a stuttering sensation, especially when stopping.
- Fatigue sets in quickly. Your legs burn because you’re fighting the extra friction with every stride. Bauer notes a flatter radius of hollow gives less grip but more glide.
- They feel unforgiving. Small weight shifts cause the blade to grab aggressively, making balanced glides or beginner maneuvers feel tense.
The Hockey Calgary guide puts it well: “The skate blades must be sharp, but not razor sharp.” You’re looking for that sweet spot where you have confident bite without sacrificing efficient glide.
The First-Time Sharpening Request: What to Say at the Shop

Walking into a pro shop for the first time can be intimidating. You don’t need to be an expert; you just need to communicate a few key things. Here’s a script.
- Declare they are new or freshly sharpened. Say: “These are brand new,” or “This is my first time getting these sharpened.” This tells the technician the blades have no existing hollow.
- State your sport and level. Say: “I’m an adult beginner learning to hockey skate,” or “I’m a recreational figure skater.” This gives them a category.
- Ask for the “house cut” or a specific ROH. Say: “What’s your standard house hollow? I’d like to start with that.” (This is usually 1/2″ or 5/8″). Or, if you’ve done research: “Can I try a 5/8″ hollow?”
- Mention any issues. Say: “I’ve been feeling really unstable on turns,” or “I feel like I’m working too hard to glide.”
That’s it. A technician will use that info to give you a standard, balanced cut. It’s your baseline. After skating on it for a few hours, you can then decide if you want more grip (a smaller ROH number) or more glide (a larger ROH number) next time.
Skate Blades vs. Knives: Understanding the Injury Risk
Can a skate blade cut you? Absolutely. Should you be terrified of handling your own skates? No.
The mechanics are different. A kitchen knife is sharpened to a single, fine point. A skate blade has two edges separated by the hollow. You can run your finger lightly over a clean edge without cutting yourself. The danger comes from force and pressure.
The Reddit community discussions are filled with sobering anecdotes. One user recounted a teammate cutting the top of a finger off while lacing up, likely from pressing a finger directly onto a burred edge with significant force. Another sharpener noted you could cut your finger if you slide it over an edge with significant pressure or if a sharp burr is left after sharpening.
The International Skating Union (ISU) takes this risk seriously in speed disciplines. Their 2025 safety communication mandates that for speed skating and short track, “blade ends must be rounded off with a minimum radius of 10 mm” to reduce puncture risks in a fall. This is a primary safety rule, not a performance suggestion.
The lesson is to respect why ice skate blades are sharp. Handle blades with respect, never grab the sharpened edge, and always use a hard skate guard when walking off-ice. Proper care, as outlined in the Riedell owner’s manual, includes wiping down the blade after use and storing skates dry to prevent rust, which can create jagged, unpredictable edges that are more dangerous than a clean, sharp one.
How sharp are skate blades compared to knives?
Skate blades are sharp, but not in the same way a kitchen or pocket knife is sharp. A knife has a single, thin, slicing edge designed to cut through material. A skate blade has two distinct edges created by the hollow ground into its bottom. These edges are meant to bite into hard ice, not slice through it. The sharpness of a skate blade is more about the precision of these two edges and the depth of the hollow between them. A brand new skate blade from the factory does not have these sharp, defined edges; they are created during the first professional sharpening. While a knife’s sharpness is judged by how cleanly it cuts, a skate blade’s effectiveness is measured by its grip and glide on the ice, which is controlled by the hollow’s depth.
Frequently Asked Questions
Are ice skate blades supposed to be sharp?
Yes, but ‘sharp’ means having two well-defined edges from a properly ground Radius of Hollow (ROH). A blade straight from the factory is not sharp, it has no hollow. Sharpness is the quality of those edges, which provides the necessary grip for pushing, turning, and stopping.
Can you get cut by ice skates?
Yes, skate blades can cause serious cuts, especially with force or impact. Cleanly sharpened edges are less dangerous than blades with nicks, burrs, or rust, which can catch and tear skin. Most handling injuries occur during lacing or from a fall where a blade contacts skin with weight behind it.
How much does it cost to sharpen ice skates?
The investment is minor compared to the performance gain and extended blade life from regular maintenance.
Do NHL players sharpen their skates every game?
Many do, but not all. It’s a matter of personal preference. Bauer recommends sharpening after every 2 to 3 hours on ice for competitive players. The key is consistency, they use the same ROH to maintain an exact feel.
Before You Go
Choosing your hollow is an ongoing experiment, not a one-time exam. Start with your shop’s standard cut, likely 5/8″, and log a few hours. Pay attention to your fatigue and your confidence in turns. If you’re fighting the ice, try a slightly shallower hollow next time (like 3/4″). If you’re slipping, go a bit deeper (like 1/2″).
That ‘slippery’ feeling comes from the equipment, not from you. Your first move should be getting your own properly fitted skates and a professional sharpening. The difference in control is immediate and worth every penny.
Finally, remember the data. That 2010 study found that players were “not sensitive enough to identify hollow radii, and only half of the subjects ranked their performance correctly.” Your feel is important, but it can be deceptive. When in doubt, stick with a standard middle-ground cut and focus on your technique. The blade is a tool. Your skill is what makes it sharp.